Change clockFenable with jumper settings
FSB settings: Switch are at the left side looking from front, between FEATURE and HDLED connector.
There are settings 50MHz, 60MHz and 66MHz.
BUS FREQ(multiplier settings) near SIMM socket.
OpenFx1.5 Short:x2.0
Setting example:Pentium-133MHz
FSB set to 66MHz.
short BUS FREQ jumper.
There are not any BF1 settings, so if you want to use Pentium-200MHz etc., you must use "geta".
I've checked working MMX Pentium 233MHz using PowerLeap.(need to set multiplier setting x1.5)